Synthetic Food Grease H1 a high performance H1 approved food grease, formulated with SHC Synthetic hydrocarbon base oils and new generation thickener, special designed for bearings and lubrication points used in food, feed and pharmaceutical processing and packaging equipment. It contributes to production in businesses that support food safety for incidental food contact points.

Synthetic Food Grease H1 shows a good resistance to normal and hot water. Strengthen with EP special additives. Thanks to this properties, it is preferred in many applications in food processing and pharmaceutical industry as a general purpose grease. It can be easily used in central lubrication systems (like: packing, swelling processes).

PLEXON H1 461 – H1 is registered with the NSF (Registration No. 151736) as an H1 lubricant.

Performance Features
• Wide operating temperature range
• Reinforced with granular additives
• Excellent elastomer and plastic compatibility,
• Unique performance of synthetic base oil,
• Provides excellent rust prevention properties.

Field Of Use
• In food, feed and pharmaceutical processing and packaging equipment as general purpose grease;
• In automotive, paper, mining, cement, agricultural machinery, construction machinery sector;
• In food-processing and beverage processing industry where high temperature is required.

Shelf Life
60 months shelf life recommended, as it is stored properly in its original, sealed container.

Technical Data

ANALYSIS STANDARD UNIT RESULT
Color White
Appearance Homogeneous
Thickener New Generation Thickener
Base Oil SHC – Mineral
Base Oil Viscosity (cst) 40 °C ASTM D445 cst 460 – 1000
Temperature Range °C -40 / 270
NLGI Class 2
Penetration ASTM D217 mm/10 265 – 295
Dropping Point ASTM D2265 °C >300
Seperation from Oil (% weight) 30 hour / 150 °C ASTM D1742 %wt %3,70
Seperation from Oil (% weight) 7 days / 40 °C IP 121 %wt %0,31
Four Ball Wear Test 1 hour / 75 °C – 400 N ASTM D2266 mm 0,65
Four Ball EP Test 10 sec. / 1770 rpm Speed ASTM D2596 kg >300
Water spray( % loss) 38,5 °C, 5dk, Max. ASTM D4049 %wt >%35
Rust Test ASTM D1743 Pass

The statements made in this publication are according to our present knowledge. They do not absolve the user from own examinations. A legally binding assurance of certain properties or suitability for a specific use can no be derived from our statements. Possibly existing laws and regulations concerning the handling and use of our products have to be observed by the receiver of our products himself.