H2 Certified Aluminum Complex Grease , formulated with highly refined paraffinic mineral base oil and aluminum complex thickener; It is a high-technology white general purpose food grease designed for bearings and lubrication points used in food processing and pharmaceutical industries. PLEXON GA 461 is registered with the NSF as an H2 lubricant.
H2 Certified Aluminum Complex Greasee is preferred in aqueous applications thanks to its gel consistency. Ideal for plastic small bearings and especially for water-resistant bearing because of its high water resistance. It contributes to production in businesses that support food safety for non- food contact points
• Wide operating temperature range (-20 / 125 °C)
• Excellent elastomer and plastic compatibility,
• Food grade white oil,
• Provides excellent rust prevention properties.
Field Of Use
• As general purpose grease for the food and pharmaceutical industries;
• In the automotive, paper, mining, cement, agricultural machinery, construction machinery sector,
• In high temperature bearings in the food-processing and beverage processing industry.
60 months shelf life recommended, as it is stored properly in its original, sealed container.
|Base Oil||–||–||Mineral White Oil|
|Base Oil Viscosity (cst) 40 °C||ASTM D445||cst||320|
|Temperature Range||–||°C||-20 / 125|
|Penetration||ASTM D217||mm/10||265 – 295|
|Dropping Point||ASTM D2265||°C||>245|
|Seperation from Oil (% weight) 30 hour / 150 °C||ASTM D1742||%wt||%4,60|
|Seperation from Oil (% weight) 7 days / 40 °C||IP 121||%wt||%0,50|
|Four Ball Wear Test 1 hour / 75 °C – 400 N||ASTM D2266||mm||0,65|
|Four Ball EP Test 10 sec. / 1770 rpm Speed||ASTM D2596||kg||300|
|Water spray( % loss) 38,5 °C, 5dk, Max.||ASTM D4049||%wt||>%35|
|Rust Test||ASTM D1743||–||Pass|
The statements made in this publication are according to our present knowledge. They do not absolve the user from own examinations. A legally binding assurance of certain properties or suitability for a specific use can no be derived from our statements. Possibly existing laws and regulations concerning the handling and use of our products have to be observed by the receiver of our products himself.