PTFE High Temperature Grease , friction points exposed to tribilogical stresses has become very excessive nowadays. It’s combating with high and variable temperatures. Various for this type of working conditions or low pressure applications long-lasting products should be preferred. For this type of applications, thanks to their chemical stability, PTFE type of lubricants are the right products.
PTFE High Temperature Grease, CORFIN Lubrication Company’s new product, high temperature grease, used safely in many type of industries, in wide range of equipment operating at high temperatures.
Wide operating temperature (-20 / 250 ° C);
Excellent elastomer and plastic compatibility;
Unique performance of PAO synthetic base oil;
It has excellent rust prevention feature;
Excellent resistance to solvents and chemicals;
By its non-toxic characteristic;
Provides excellent performance with low evaporation stability.
In vals roller bearings,
In the engine bed seats,
In conveyor belts and chains,
In sterile room equipment,
On the friction surfaces of electrical and electronic equipment,
On all the rotating and moving parts of the helicopters,
In ABS braking systems of land transport vehicles,
In all robotic production devices
It is used safely in vacuum pumps.
60 months shelf life recommended, as it is stored properly in its original, sealed container.
|Base Oil||–||–||PAO – PTFE|
|Base Oil Viscosity (cst) 40 °C||ASTM D445||cst||400|
|Temperature Range||–||°C||-20 / 250|
|Penetration||ASTM D217||mm/10||265 – 295|
|Dropping Point||ASTM D2265||°C||>Not Dropping|
|Four Ball Wear Test 1 hour / 75 °C – 400 N||ASTM D2266||mm||0,65|
|Four Ball EP Test 10 sec. / 1770 rpm Speed||ASTM D2596||kg||>350|
The statements made in this publication are according to our present knowledge. They do not absolve the user from own examinations. A legally binding assurance of certain properties or suitability for a specific use can no be derived from our statements. Possibly existing laws and regulations concerning the handling and use of our products have to be observed by the receiver of our products himself.