High temperature Mounting Paste , is a special paste containing solid lubricant. Which is used for high pressure casting of non-ferrous metals. Fluid mold releases agents sometimes may not be sufficient to separate molten metals from the mold surface.
So in such cases, extra grease may be required for hot molds and the inner side of mold. It should not be stored at temperatures above 50 ° C. It must be protected against freezing. If stored at low temperatures, it should be warmed up to room temperature before use. The liquid release agent has a positive effect in the throat and in the separation of the core. Easily applicable.
Even at high temperatures, it allows easy separation from the mold.
Avoids the adhesion of metal from casting
The liquid release agent has a positive effect in the throat and in the separation of the core.
It is used safely in the mounting screws.
Provides excellent performance.
The product should be stored in its original package, as well as in a dry place, for 24 months. It should not be stored at temperatures above 50 ° C. It must be protected against frost. If stored at lower temperatures, it should be expected to warm up to room temperature before use.
The statements made in this publication are according to our present knowledge. They do not absolve the user from own examinations. A legally binding assurance of certain properties or suitability for a specific use can no be derived from our statements. Possibly existing laws and regulations concerning the handling and use of our products have to be observed by the receiver of our products himself.