Multipurpose White Grease developed by Corfin Lubrication team. It is a multipurpose grease with lithium complex soap, with a good adhesion properties in applications and with a long-lasting in different applications.
Multipurpose White Grease shows a good strength to hot, or cold, temperatures and moisture. It’s not broken down its structures at low and high working temperature. Contains special nanotechnology oxidation and anti-aging additives. It has high pumpability and neutral behavior against sealing elements. In addition, ALBA 2, a special series from Corfin Lubrication products range, due to its excellent retention properties. It provides a long lasting lubrication period and offers lower lubrication costs.
Wide operating temperature (-30/ 120 ° C)
Reinforced high pressure strength (350kg)
Elastomer and plastic compatibility,
Very good adhesion,
Superior protection against rust and corrosion.
FIELD OF USE:
It is preferable to be used in wet textile finishing operation under difficult working conditions.
Thanks to its high retention feature which is used in the lubrication of medium and high speed running gear,
ALBA2, used at low operating temperatures too. It extends the service life, by several times compared to universal greases in air cool storage and shocking units.
Can be used in weaving machines maintenance points and in the greasing points defined in the catalog under the heading “white special”.
Especially preferred by users in gears of embroidery machines, because it is completely washing out by not leaving no stain on the fabric.
Provides long-lasting lubrication in fan and electric motor bearings,
Available in sliding bearings and bearings operating under heavy loads,
Excellent pumpability ,
Provides excellent safety lubrication even under high pressures.
36 months shelf life recommended, as it is stored properly in its original and sealed container.
|Base Oil||–||–||Paraffinic Mineral|
|Base Oil Viscosity (cst) 40 °C||ASTM D445||cst||180|
|Temperature Range||–||°C||-30 / 120|
|Penetration||ASTM D217||mm/10||285 – 315|
|Dropping Point||ASTM D2265||°C||>200|
|Penetration Stability||ASTM D1831||mm/10||>+15|
|Seperation from Oil (% weight) 30 hour / 150 °C||ASTM D1742||%wt||%6,50|
|Seperation from Oil (% weight) 7 days / 40 °C||IP 121||%wt||%0,26|
|Four Ball Wear Test 1 hour / 75 °C – 400 N||ASTM D2266||mm||0,65|
|Four Ball EP Test 10 sec. / 1770 rpm Speed||ASTM D2596||kg||400|
|Water spray( % loss) 38,5 °C, 5dk, Max.||ASTM D4049||%wt||>%15|
|Rust Test||ASTM D1743||–||Pass|
|Speed Factor (n x dm), [mm x min]||–||–||300.000|
The statements made in this publication are according to our present knowledge. They do not absolve the user from own examinations. A legally binding assurance of certain properties or suitability for a specific use can no be derived from our statements. Possibly existing laws and regulations concerning the handling and use of our products have to be observed by the receiver of our products himself.