High Temperature Bentonite Lubrication Grease , thickened with extra high performance kiln, designed for high speed and high temperature applications, or for lubrication of sliding and ball bearings exposed to variable working conditions from normal to high temperatures. Unlike conventional soap thickener, it is not melting at high working temperatures thanks to its clay thickener.
High Temperature Bentonite Lubrication Grease, made from high quality and high viscosity mineral base oil. It is specially formulated to provide excellent resistance to low evaporation and oxidation at high temperatures, excellent water washout resistance, high performance against corrosion at low speeds and heavy loads applications.
It offers good protection against corrosion and high working temperatures;
Leakage is prevented in the bearing and the grease is stable in its consistency;
Excellent water washout and steam resistance;
Excellent stability against high and variable working temperatures.
Furnace conveyor chain bearings;
Slag and hot metal car wheel bearings;
In glass industry in conveyor band roller bearing;
Camshafts, slides and other sliding machine elements.
36 months shelf life recommended, as it is stored properly in its original, sealed container.
|Base Oil||–||–||Paraffinic Mineral|
|Base Oil Viscosity (cst) 40 °C||ASTM D445||cst||220|
|Temperature Range||–||°C||-15 / 150|
|Penetration||ASTM D217||mm/10||265 – 295|
|Dropping Point||ASTM D2265||°C||Not Dropping|
|Seperation from Oil (% weight) 30 hour / 150 °C||ASTM D1742||%wt||%3,50|
|Seperation from Oil (% weight) 7 days / 40 °C||IP 121||%wt||%0,15|
|Four Ball Wear Test 1 hour / 75 °C – 400 N||ASTM D2266||mm||0,65|
|Four Ball EP Test 10 sec. / 1770 rpm Speed||ASTM D2596||kg||350|
|Water spray( % loss) 38,5 °C, 5dk, Max.||ASTM D4049||%wt||>%35|
|Rust Test||ASTM D1743||–||Pass|
|Speed Factor (n x dm), [mm x min]||–||–||300.000|
The statements made in this publication are according to our present knowledge. They do not absolve the user from own examinations. A legally binding assurance of certain properties or suitability for a specific use can no be derived from our statements. Possibly existing laws and regulations concerning the handling and use of our products have to be observed by the receiver of our products himself.